Vega Floor is a modular acoustic system designed to bring studio-grade sound isolation into modern homes and offices. By combining dense composite panels with tuned air gaps, it targets mid and high frequency reflections while keeping installation simple.
Engineers optimize the layered board layout to minimize standing waves and boundary bass boost, so the surface performs well in small control rooms, rehearsal spaces, and critical listening environments.
| Parameter | Value | Unit | Typical Tolerance |
|---|---|---|---|
| Nominal Thickness | 50 | mm | ±2 |
| Density | 1.2 | g/cm3 | ±0.05 |
| Air Gap | 25 | mm | ±1 |
| Mounting Pattern | 600 x 600 | mm | Staggered |
| Installation Time | 2.5 | hours | for 20 m2 |
Installation Process and Site Preparation
Surface Inspection and Cleaning
Before mounting Vega Floor panels, verify that the subfloor is level within 2 mm per meter and free from dust, oil, and loose particles. Use a moisture meter to confirm that slab conditions are below 3 % relative humidity to prevent long-term warp.
Layout, Modularity, and Edge Trimming
Plan the grid so that seams between panels do not align row by row, which reduces the propagation of structural vibration. Where panels must be trimmed to fit around columns or door frames, score both faces and snap with a straight edge to maintain acoustic seal integrity.
Mounting Hardware and Isolation Clips
Attach perimeter isolation clips first, then insert the core panel while maintaining a continuous compression gasket at each joint. Verify that each clip is torqued to the manufacturer specification to preserve the tuned air gap and prevent rigid pathways.
Acoustic Performance Specifications
Sound Reduction Index and Frequency Range
Laboratory measurements show that Vega Floor delivers a weighted sound reduction index of 28 dB across the standardized 100–4000 Hz band, with especially strong attenuation above 1 kHz where reflection and flutter echo are most audible.
Low Frequency Behavior and Boundary Gain
At frequencies below 125 Hz, performance is limited by the gap size and floor compliance; placing additional mass or low frequency traps beneath the system restores absorption depth and flattens the room mode response.
Material Composition and Long Term Durability
Core Constituents and Fire Ratings
The internal core blends mineral fibers with high stiffness polymer binders to achieve consistent damping, while the outer facings provide Class E fire resistance and meet low-smoke toxicity standards for commercial interiors.
Environmental Resistance and Maintenance Procedures
Designed for stable performance across typical indoor temperature swings, the panels resist mould under normal humidity. Routine cleaning with a dry microfibre cloth and occasional vacuuming is sufficient; avoid aggressive detergents that could degrade surface coatings.
Design and Integration with Existing Architecture
Compatibility with Raised Floors and Slab Structures
In offices with underfloor services, Vega Floor modules can be floated above the plenum while maintaining vibration isolation, preserving access routes and reducing the need for extensive demolition work.
Aesthetic Options and Spatial Perception
Available in neutral and accent colours, the structured surface diffuses midrange reflections, reducing hot spots and making smaller rooms feel more spacious without introducing visual noise.
Operational Guidelines and Best Practices
- Verify subflatness and moisture level before mounting any clips
- Stagger vertical joints so that no continuous line runs through adjacent rows
- Compress isolation clips to the recommended torque, then recheck after 48 hours
- Combine edge banding with perimeter absorbers to control boundary bass
FAQ
Reader questions
Can Vega Floor be installed directly over concrete without a vapor barrier?
Use a continuous vapor barrier beneath the panels when the slab is at or above the critical moisture threshold; otherwise rising damp can degrade the mineral core and affect long term acoustic stability.
How does the modular clip system affect the room mode response?
The tuned air gap formed by the isolation clips decouples the mass from the structure, which deepens low frequency absorption without changing the visual pattern of the layout on the ceiling plane.
What is the expected lifespan when panels are maintained annually?
With periodic inspection of clips and gaskets, manufacturers typically specify a service life exceeding 15 years before noticeable compression or loss of isolation performance becomes evident.
Are replacement panels color matched if part of the batch is discontinued?
Contact the supplier for an exact colour match code; minor lot variations can occur, and providing reference swatches ensures seamless integration when expanding the Vega Floor system later.