Step Zinone Grease 2 delivers a high performance lubrication solution for vintage car enthusiasts and show car builders. This specially formulated grease targets classic muscle and show vehicles that demand authentic appearance combined with durable protection.
Designed for visible components, it provides a convincing wet look while resisting washout and road grime. Below is a structured overview of core product attributes for quick reference.
| Product | Finish | Temperature Range | Key Use Case |
|---|---|---|---|
| Step Zinone Grease 2 | Wet, glossy black | -40°F to 500°F | Chrome, exposed bolts, visible hinges |
| Base Compound | Carbon black paste | -30°F to 450°F | Under-hood parts needing heat resistance |
| Sticking Quality | High tack, drip resistant | - | Vertical surfaces without sagging |
| Water Resistance | Excellent runoff resistance | - | Car show washes and rainy conditions |
Classic Car Show Authenticity
Step Zinone Grease 2 is engineered to meet the visual expectations of classic car show circuits. The deep black, semi-gloss finish mirrors the look of period correct parts without attracting extra dust between judging rounds.
By balancing pigment concentration with oil content, the grease maintains its sheen through long display days. Judges often note the uniform appearance of components treated with this product during professional level concours events.
Heat and Environmental Resistance
Under the hood, exposed bolts and brackets face constant thermal cycling. Step Zinone Grease 2 retains its adhesion from cold starts to high temperature cruising, reducing the risk of loosening or seizing.
The formulation resists washout during pressure washing and heavy road spray. This makes it suitable for vehicles that see regular driving, not just static display.
Application on Visible Components
For show preparation, focus on parts that judges and photographers will notice, such as shocks, brackets, and exposed fasteners. A thin, even coat prevents thick buildup that can look sloppy under studio lighting.
Use a brush or gloved finger to work the product into threads and contact surfaces. The grease provides both lubrication for adjustment and a barrier against rust on steel hardware.
Compatibility and Surface Bonding
Step Zinone Grease 2 bonds well to painted steel, plated chrome, and anodized aluminum when surfaces are clean and dry. It is not recommended for rubber or plastic parts that could be damaged by aggressive solvents in the carrier system.
Always test on a hidden area first to confirm finish compatibility with delicate chrome plating or aftermarket coatings used on show cars.
Key Takeaways and Recommendations
- Use on visible chrome, bolts, and suspension components for a show ready wet look
- Ideal temperature range from -40°F to 500°F for daily driving and display
- High tack formula resists sling and washout under road and spray conditions
- Perform a spot test on delicate finishes before full application
- Apply thin coats and wipe excess to maintain a professional appearance
FAQ
Reader questions
Is Step Zinone Grease 2 suitable for chrome suspension parts on a concours show car?
Yes, it is commonly used on visible chrome components to provide a consistent wet look while resisting handling and display wear. Apply a thin layer and wipe off excess to avoid heavy buildup in crevices.
Will this grease drip or run on vertical surfaces during a hot car show?
The high tack formula is designed to remain in place on vertical surfaces, but very hot conditions can soften any grease. Apply a moderate coat and avoid overfilling areas where gravity can cause migration.
Can I use Step Zinone Grease 2 on bolts that I still need to adjust in the future?
Yes, the grease maintains adjustability while providing protection. It allows for controlled tightening or removal later, though repeated disassembly may gradually remove the product.
Does this product contain solvents that could affect nearby rubber or plastic trim?
It does contain carrier solvents designed for metal surfaces, so avoid direct contact with rubber seals, hoses, or painted plastic. Mask nearby non metal surfaces during application.