The 2020 Hyundai Palisade positions itself as a spacious three-row midsize SUV with refined features and a smooth powertrain. Understanding underhood maintenance, such as locating the oil filter, helps owners perform timely service and keep the engine running reliably.
This guide walks through the oil filter location, tools, and replacement tips specific to the 2020 model year while highlighting related maintenance considerations.
| Model Year | Engine | Oil Filter Part Number | Filter Orientation |
|---|---|---|---|
| 2020 | 3.8L Lambda II V6 | SO-07489 | Vertical, underhood |
| 2020 | 3.8L Lambda II V6 (Optional) | SO-07489A | Vertical, underhood |
| 2020 | 3.5L Smartstream G3.5 GDI V6 | SO-07489B | Vertical, underhood |
| 2020 | 3.5L Smartstream G3.5 GDI V6 (China) | SO-07489C | Vertical, underhood |
Locating the Oil Filter on the 2020 Palisade
On the 2020 Hyundai Palisade, the oil filter is situated in the engine bay rather than underneath the vehicle. This placement simplifies access for scheduled maintenance and DIY changes, especially on models equipped with the 3.8L V6 found in many trims.
To reach the filter, you typically need to open the hood and work on the passenger side of the engine compartment. The cylindrical filter is mounted vertically near the front of the engine block, positioned behind the intake manifold area for cleaner airflow management.
While the exact side can vary slightly between trim levels, the general layout remains consistent, allowing owners to follow a straightforward path when preparing for an oil change.
Tools Needed for Oil Filter Replacement
Replacing the oil filter on the 2020 Palisade requires a few common hand tools and a new OEM or high-quality aftermarket filter. Gathering everything beforehand reduces downtime and prevents mid-job trips to the parts store.
- Socket wrench set with standard and metric sockets
- Oil filter wrench, strap-type or adjustable
- New oil filter matching your engine specification
- Engine oil drain pan and funnel
- Disposable gloves and shop rags
Step-by-Step Replacement Procedure
Before servicing the vehicle, ensure the engine is cool and the parking brake is engaged. Raising the front with a jack and securing it on jack stands is optional, as the filter is accessible with the vehicle on the ground on most trims.
Locate the filter housing near the front of the engine, disconnect the negative battery terminal if recommended in your manual, and drain the old oil first. Then remove the old filter, prepare the new gasket with a small amount of fresh oil, and hand-tighten the replacement filter to the manufacturer’s specified torque, usually a little beyond hand tight.
Maintenance Tips and Best Practices
Following the recommended service intervals helps maintain warranty compliance and engine longevity for the 2020 Palisade. Using the correct filter and proper installation technique minimizes the risk of leaks and premature failure.
- Check your owner’s manual for the exact filter part number and torque specification
- Replace the oil drain plug seal and inspect for debris during each service
- Recycle used oil and dispose of the old filter at an approved facility
- Record the mileage and date of each oil change for resale value and service history
Reliable Maintenance for Your 2020 Palisade
Knowing the oil filter location and adhering to scheduled oil changes keeps the 3.8L V6 running smoothly while supporting long-term durability and resale value.
By using the correct tools, quality filters, and consistent service intervals, you can maximize performance and reduce the likelihood of unexpected underhood issues on the road.
FAQ
Reader questions
Where is the oil filter located on my 2020 Palisade?
The oil filter is located vertically in the engine bay, typically on the passenger side near the front of the engine for most 2020 Hyundai Palisade trimes.
Do I need to lift the vehicle to access the filter?
No, the filter is accessible with the vehicle on level ground, although some owners prefer a slight lift for added clearance depending on tools and comfort.
What type of oil filter should I use for my Palisade?
Use an OEM or high-quality aftermarket filter that matches part number SO-07489 (or variant) for the 3.8L V6, ensuring proper sealing and filtration.
How often should I replace the oil filter on my 2020 Palisade?
Follow the maintenance schedule in your owner’s manual, generally every 10,000 to 12,000 miles or annually, depending on driving conditions and oil type.