If you drive a 2019 Chrysler Pacifica, knowing where the spare tire is located can save you time and stress on the road. This guide walks you through the exact location, removal steps, and related tips specific to your model year.
Use the quick reference table below to compare key details at a glance, then explore each topic in depth.
| Item | Location | Tool Required | Typical Access Time |
|---|---|---|---|
| 2019 Chrysler Pacifica | Under the cargo floor, rear of the vehicle | Lug wrench, jack, floor tool (or tire iron) | 5–10 minutes |
| Tire Pressure | N/A | Tire gauge | <1 minute |
| Jack Points | Designated pinch welts at front and rear | Vehicle jack | 1–2 minutes |
| Storage Compartment | Cargo area under the rear floor | Floor tool | 3–5 minutes |
Locating the Spare Tire in the 2019 Chrysler Pacifica
The spare tire in a 2019 Chrysler Pacifica is not under the vehicle or in the engine bay. Instead, it is stored underneath the rear cargo area, accessed from inside the vehicle. You will find it beneath the floor panel at the back of the cargo space, making it somewhat out of sight but easy to reach when needed.
To visualize the spot, stand in the rear cargo area and look for a rectangular access panel. This panel is usually marked or sits between other storage compartments. The spare tire lies below this panel, protected from road debris and hidden from casual view.
Tools and Preparation for Spare Tire Access
Before you begin, gather the necessary tools. You will typically need a lug wrench, a vehicle jack, and the floor tool that came with your Pacifica. Many models include a dedicated floor tool stored in a nearby compartment, often found on the side wall of the cargo area.
Ensure the vehicle is on level ground and the parking brake is engaged before lifting. Position the jack at the recommended lift points along the rear undercarriage to safely raise the back of the vehicle. Safety and preparation reduce stress and make the process smoother.
Step-by-Step Spare Tire Removal Process
Removing the spare tire requires a few deliberate steps. Start by clearing any cargo or items that may block access to the rear floor panel. Use a flashlight if the area is dim, and keep the lug wrench and jack within reach for the next stages.
Once you are ready, follow these steps:
- Open the rear doors and locate the floor access panel at the very back of the cargo area.
- Use the floor tool or a flathead screwdriver to carefully pry off the panel, exposing the spare tire and its mounting hardware.
- Loosen the lug nuts on the spare tire a little, then lift the tire slightly to remove it from its mount.
- Lower the tire to the ground, fully remove the lug nuts, and pull the spare tire out from under the vehicle.
Stowing and Maintaining Your Spare Tire
After you retrieve the spare tire, inspect it for proper pressure, tread depth, and any visible damage. The recommended pressure is usually listed on a sticker inside the driver’s doorjamb or in the owner’s manual. If the spare appears low, use an air pump to bring it up to the specified level.
When reinstalling the spare, reverse the removal steps by placing the tire back into position, hand-tightening the lug nuts, then lowering the vehicle slowly with the jack. Finish tightening the lug nuts in a star pattern once the vehicle is fully on the ground to ensure a secure fit for safe driving.
Key Takeaways for 2019 Chrysler Pacifica Spare Tire Management
- Know the location: under the rear cargo floor, accessed from inside the vehicle.
- Keep the floor tool, lug wrench, and jack in your vehicle for quick access.
- Check spare tire pressure regularly and maintain it to manufacturer specs.
- Use the jack at designated lift points and follow safe lifting procedures.
- Treat the spare tire as temporary support and plan for full service as soon as possible.
FAQ
Reader questions
Where exactly is the spare tire stored in my 2019 Chrysler Pacifica?
The spare tire is located underneath the rear cargo floor, accessed from inside the vehicle by removing a rectangular floor panel at the back of the cargo area.
What tools do I need to remove the spare tire from my Pacifica?
You will typically need a lug wrench, a vehicle jack, and the floor tool that came with your Pacifica to safely remove and reinstall the spare tire.
How do I check the tire pressure on my spare tire?
Use a tire gauge on the valve stem of the spare tire to check pressure; the recommended level is usually found on the driver’s doorjamb or in the owner’s manual.
Can I drive on my spare tire long-term after removing it from the Pacifica?
Spare tires are intended for temporary use only; drive cautiously, limit distance, and seek professional service to replace or repair the damaged tire as soon as possible.