The 2008 Honda Civic relies on a reliable Fram oil filter to keep its engine clean and running smoothly. Choosing the correct filtration part helps protect vital components and supports long term durability.
Below is a detailed overview of Fram options, fitment, and maintenance tips specific to the 2008 Honda Civic, including practical specifications and replacement guidance.
| Filter Brand | Model Series | Fram Filter Number | Recommended Media |
|---|---|---|---|
| Fram | Extra Guard | PH3802 | Standard cellulose blend |
| Fram | Ultra | PH7302 | Synthetic blend media |
| Fram | Classic | LK1515 | Standard cellulose |
| Fram | XP Guard | PH1515 | High efficiency synthetic blend |
2008 Honda Civic Oil Filter Compatibility
Confirming compatibility between the Fram filter and your 2008 Honda Civic prevents installation issues and ensures proper sealing. Many Civic owners rely on Fram because of its widespread availability and proven performance in everyday driving conditions.
By matching the correct Fram part number to the engine size and generation, you can avoid leaks and maintain consistent oil flow. Refer to your owner’s manual or the old filter markings to verify dimensions, thread pitch, and drain plug design before purchasing.
Using an incorrect filter can lead to poor sealing, reduced filtration, or even damage to the oil drain plug or mounting surface. Always check the vehicle specific data on the packaging or the seller’s description.
Fram Filter Specifications For 2008 Civic Engine Options
The 2008 Honda Civic offered several engine choices, and each requires a compatible Fram filter with the right thread size, height, and media type. Selecting the correct filter helps maintain optimal oil pressure and lubrication across different driving styles.
Below is a detailed specification table that compares common Fram models suitable for Civic trims, including base filters and higher performance options for more demanding use.
| Engine | Fram Part Number | Thread Diameter | Height | Media Type |
|---|---|---|---|---|
| 1.8 L K-series | PH3802 | 19 mm | 86 mm | Standard cellulose |
| 1.8 L K-series | PH7302 | 19 mm | 83 mm | Synthetic blend |
| 1.8 L K-series | LK1515 | 19 mm | 85 mm | Standard cellulose |
| 1.8 L K-series | PH1515 | 19 mm | 80 mm | High efficiency synthetic |
Installing And Replacing The Fram Oil Filter
Proper installation of a Fram oil filter on your 2008 Honda Civic supports consistent lubrication and reduces the risk of premature wear. Following a few basic steps ensures a secure fit and prevents common mistakes such as cross threading or incorrect torque.
Before starting, gather tools such as a wrench, gloves, and a drain pan. Use light oil on the gasket to ease initial threading and always tighten the filter by hand according to the recommended snug plus quarter turn method for most spin on filters.
After installation, start the engine and check for leaks around the seating surface. Address any seepage immediately by safely draining and reinstalling the filter with correct seating.
Benefits Of Using A Quality Fram Filter In Your Civic
A high quality Fram filter captures contaminants that can damage pistons, bearings, and other critical engine parts. This is especially important in the 2008 Honda Civic, where precise oil flow supports fuel efficiency and responsive performance.
Fram filters are designed to balance dirt holding capacity with low flow resistance, helping to maintain stable oil pressure during cold starts and highway driving. Many owners also appreciate the wide availability, competitive pricing, and support of genuine equipment manufacturer specifications.
Regular filter changes using a trusted Fram product can extend oil change intervals while protecting the engine from sludge, metal particles, and other harmful debris under demanding conditions.
Maintenance Recommendations
- Replace the Fram oil filter with every oil change, typically every 5,000 to 7,500 miles depending on driving habits.
- Use the correct Fram part number for your exact 2008 Honda Civic trim and engine.
- Apply a thin layer of fresh oil to the new gasket before threading to ensure a proper seal.
- Hand tighten the filter snug plus about a quarter turn, avoiding excessive force that can damage the mounting surface.
- Check for leaks after starting the engine and inspect the filter seating if oil spots appear near the drain plug or filter.
FAQ
Reader questions
Will a Fram PH3802 fit my 2008 Civic LX sedan with the 1.8 liter engine?
Yes, the Fram PH3802 is a direct replacement for many 2008 Honda Civic 1.8 L models, including LX and other trims, as long as the engine is the standard K series unit.
Can I use the Fram Ultra synthetic filter instead of the Extra Guard version?
The Fram Ultra uses a synthetic blend media and typically fits the same 1.8 L Civic applications, but verify the filter number and dimensions before purchasing to ensure compatibility with your specific setup.
Is the Fram LK1515 suitable for my base model Civic engine?
The Fram LK1515 is designed for certain K series engines and often matches the thread size and height needed for a 2008 Civic, though confirming the exact part number on the packaging is recommended.
How do I know if the filter is seated correctly after tightening?
Start the engine, let it idle, then inspect the filter and drain plug area for any fresh oil leaks, and recheck tightness if necessary while the engine is running.